TIER-1 SAFETY, FULL STATUTORY LICENSING & STATEWIDE WA MOBILISATION.
Compliant with the Work Health and Safety Act, High Risk Construction Work (HRCW) regulations, and the WHS (Mines) Regulations. We integrate seamlessly into client Mine Safety Management Systems (MSMS) and mobilise rapidly across Western Australia.
Tier-1 & MSMS Ready
Perth & Statewide WA Mobilisation
Turnkey Compliance Across Western Australia.
Winning and executing gas and hydraulic packages requires more than trade skill. Because most work on or near pressurised gas distribution mains and industrial piping is classified as High Risk Construction Work (HRCW), we operate in strict compliance with the Work Health and Safety Act 2020 (WA), WHS (General) Regulations 2022, and the WHS (Mines) Regulations 2022, with full capability to integrate directly into your Mine Safety Management System (MSMS).
Because our tradesmen hold Unrestricted Class G, Unrestricted Class I(A), and Class I(B) gasfitting permits alongside WA Plumbing Contractor and Electrical licences, we inspect, install, and maintain your entire site, from commercial gas, fire water services, backflow prevention, water supply, sanitary, and drainage systems right through to industrial gas piping operating above 200 kPa and Type B process burners of any GJ capacity.
Statutory Authorisations
- Unrestricted Class G Gasfitting PermitAS/NZS 5601.1 & AS/NZS 1596
Authorised for all general commercial and industrial Natural Gas and LPG installations and Type A gas appliances (AS/NZS 5601.1 and AS/NZS 1596).
- Class I(A) Gasfitting PermitAS 3814 & AS 1375
We hold a full unrestricted Class I(A) gas licence, authorising us to install, commission, and service Type B gas appliances and industrial fuel-fired equipment (AS 3814 and AS 1375).
- Class I(B) Gasfitting PermitAll Pressures (<200 & >200 kPa)
Authorised for gasfitting work on consumer piping systems operating above 200 kPa, alongside all standard low and medium pressure tiers (<200 kPa).
- WA Plumbing Contractor & Electrical LicencesAS/NZS 3500 & NCC
Authorised across commercial and industrial water supply, sanitary, drainage, fire water services, and testable backflow prevention (AS/NZS 3500, AS 2419.1, AS 2441, and the National Construction Code), alongside licensed electrical capabilities for burner controls and plant integration.
WHS Compliance, Mine Safety (MSMS) & Safe Work Practices.
We operate under a structured Safety Management System (SMS) engineered to comply with WA statutory safety legislation and integrate directly into Tier-1 resource, energy, and construction frameworks:
WHS Act & High Risk Construction Work (HRCW) Compliance
Full compliance with the Work Health and Safety Act 2020 (WA) and WHS Regulations. As most work on pressurised gas installations is classified as High Risk Construction Work (HRCW), we prepare rigorous, site-specific Safe Work Method Statements (SWMS), JSEAs, and risk assessments before any work begins.
WHS (Mines) Regulations & Mine Safety Management Systems (MSMS)
Compliant with the Work Health and Safety (Mines) Regulations 2022 and experienced in integrating seamlessly into client Mine Safety Management Systems (MSMS), statutory mine-site appointments, and site safety governance.
Permit-to-Work (PTW) & High Risk Work Licences
Full integration with client Permit-to-Work systems backed by current High Risk Work Licences (HRWL), covering Working at Heights, Elevated Work Platforms (EWP), Confined Space Entry, Hot Work, Rigging/Dogging & Crane Lift Plans, Gas-Free / Atmospheric Testing, and Lockout/Tagout (LOTO) Isolation procedures.
Excavation Procedures & Underground Asset Locating
Strict ground disturbance and excavation procedures, including mandatory underground utility and asset locating prior to excavation, potholing verification, and compliant trenching for buried PE, steel gas, water, and drainage mains.
PE Welding & Protective Coating Competencies
Qualified tradesmen for polyethylene (PE) electrofusion and butt welding, plus certified application of anti-corrosion protective wrapping and coatings in Stopaq, Canusa, Denso, and Solartech.
Quality Assurance, Handover MDRs & Fit-for-Work Tradesmen
Complete Manufacturer's Data Reports (MDR), Inspection and Test Plans (ITPs), weld maps, NATA-traceable pressure test certificates, and drug-and-alcohol screened, medically cleared tradesmen inducted for high-security and remote mine sites.
Western Australian Statutory Licences (Gas, Plumbing & Electrical).
Our tradesmen hold complete gasfitting, plumbing contractor, and electrical authorisations issued by Building and Energy WA:
Unrestricted Class G Gasfitting Permit
Authorised for all general commercial and industrial Natural Gas and LPG installations and Type A gas appliances (AS/NZS 5601.1 and AS/NZS 1596).
Class I(A) Gasfitting Permit (Unrestricted)
We hold a full unrestricted Class I(A) gas licence, authorising us to install, commission, and service Type B gas appliances and industrial fuel-fired equipment (AS 3814 and AS 1375).
Class I(B) Gasfitting Permit
Authorised for gasfitting work on consumer piping systems operating above 200 kPa, alongside all standard low and medium pressure installations (<200 kPa).
WA Plumbing Contractor & Electrical Licences
Authorised and equally skilled across commercial and industrial water supply, sanitary, drainage, fire water services, and testable backflow prevention (AS/NZS 3500.1, AS 2419.1, AS 2441, and the National Construction Code), supported by licensed electrical capabilities for burner controls, BMS, and plant integration.
Comprehensive Commercial Insurances.
To protect our clients and streamline vendor onboarding, Industry Gas Services maintains comprehensive insurance coverage (Certificates of Currency available upon request for tender submissions):
Public & Products Liability Insurance
Commercial & Industrial Gasfitting and Plumbing endorsed coverage suitable for major commercial, resource, and infrastructure sites.
Workers' Compensation Insurance
Full WorkCover WA compliant coverage across metropolitan and regional field operations.
Commercial Motor Vehicle & Mobile Plant Insurance
Comprehensive fleet and mobile tooling coverage for site-wide and regional WA mobilisation.
Contract Works / Professional Indemnity Coverage
Tailored project and contract works protection structured as required by contract scope.
Statewide WA Mobilisation: From Perth to Every Region.
With our operations center based in Perth, we rapidly mobilise personnel, calibrated test equipment, and specialized tooling across metropolitan and regional Western Australia for scheduled capital projects, shutdowns, and urgent compliance works:
| WA Region | Key Industrial, Mining & Commercial Hubs Serviced |
|---|---|
Perth Metropolitan | Kwinana Industrial Area, Henderson, Welshpool, Kewdale, Malaga, Neerabup, Rockingham, CBD precincts, and metro commercial/industrial sites. |
Pilbara | Karratha, Port Hedland, Newman, Tom Price, Onslow, Paraburdoo, and remote FIFO mine and LNG/power processing sites. |
Kimberley | Broome, Kununurra, Derby, Wyndham, Halls Creek, and regional power/healthcare infrastructure. |
Gascoyne | Carnarvon, Exmouth, Denham, and regional energy and processing facilities. |
Mid West | Geraldton, Meekatharra, Mount Magnet, Cue, Morawa, and Murchison mining operations. |
Goldfields-Esperance | Kalgoorlie-Boulder, Kambalda, Leonora, Laverton, Norseman, Leinster, and Esperance port/industrial precincts. |
Wheatbelt | Northam, Narrogin, Merredin, Moora, Jurien Bay, and agricultural/industrial processing hubs. |
South West | Bunbury, Kemerton Industrial Park, Collie, Busselton, Margaret River, and Manjimup. |
Great Southern | Albany, Katanning, Mount Barker, Kojonup, and regional food/timber processing facilities. |
Need a Rapid Quote, Pre-Qualification Pack, or Technical Consultation?
Speak directly with our Western Australian commercial and industrial gas engineering team for upcoming shutdowns, brownfield upgrades, compliance audits, or greenfield capital works.
Direct Procurement & Vendor Details
- Phone1300 779 171
- Australian Business NumberABN 78 714 615 245
- HeadquartersCommercial Operations Center, Perth, Western Australia
Explore Other Specialist Gas Capabilities.
Commercial & Industrial Gasfitting & Plumbing
All-pressure commercial and industrial gasfitting (<200 kPa and >200 kPa), Type A and Type B appliance piping, gas leak detection and leak repairs, water removal from gas installations, below-ground PE piping, commercial fire water services, backflow testing, and water supply, sanitary, and drainage plumbing.
Type B Gas Appliances, BMS & Special Applications
Full unrestricted Class I(A) gasfitting to install, commission, and service Type B gas appliances, valve trains, Burner Management Systems (BMS), incinerators, cremators, smoke ovens, coffee roasters, and gas engines.
Medical & Laboratory Gas Pipeline Systems
AS 2896 compliant medical and lab pipelines for Medical O₂, Medical Air, N₂O, CO₂, N₂, Medical Vacuum, Surgical Air, and WAGD.
Process, Shielding, Instrument & Biomethane Gases
Shielding and fuel gases (Argon, CO₂, O₂, Acetylene, LPG to AS/NZS 1596), high-purity instrument gas lines, and biomethane / renewable gas infrastructure for processing and power generation.
Pressure Testing, Audits, Leak Repairs & Maintenance
Statutory inspections, compliance audits, pneumatic/hydrostatic pressure testing (<200 kPa & >200 kPa), gas leak detection and leak repairs, removing water from gas installations, commercial fire water services, and annual backflow prevention testing (DCVs & RPZDs).