TYPE B GAS APPLIANCES, BURNER MANAGEMENT & SPECIALIST COMBUSTION SYSTEMS.
We hold a full unrestricted Class I(A) gas licence to install, commission, and service Type B gas appliances and industrial fuel-fired systems of any GJ capacity, delivering engineered valve trains and Burner Management Systems (BMS) across Western Australia.
Unrestricted Class I(A) • Type B
Perth & Statewide WA Mobilisation
Turnkey Compliance Across Western Australia.
Industry Gas Services holds a full unrestricted Class I(A) Gasfitting Permit under Western Australian gas regulations, authorising our tradesmen to install, commission, and service Type B gas appliances and industrial fuel-fired equipment across any GJ capacity.
We work directly with plant engineers, equipment OEMs, and independent Type B inspectors to take custom, imported, and high-capacity gas-fired equipment from mechanical, gas piping, and plumbing installation through to final AS 3814 and AS 1375 approval with zero compliance bottlenecks.
Statutory Authorisations
- Unrestricted Class G Gasfitting PermitAS/NZS 5601.1 & AS/NZS 1596
Authorised for all general commercial and industrial Natural Gas and LPG installations and Type A gas appliances (AS/NZS 5601.1 and AS/NZS 1596).
- Class I(A) Gasfitting PermitAS 3814 & AS 1375
We hold a full unrestricted Class I(A) gas licence, authorising us to install, commission, and service Type B gas appliances and industrial fuel-fired equipment (AS 3814 and AS 1375).
- Class I(B) Gasfitting PermitAll Pressures (<200 & >200 kPa)
Authorised for gasfitting work on consumer piping systems operating above 200 kPa, alongside all standard low and medium pressure tiers (<200 kPa).
- WA Plumbing Contractor & Electrical LicencesAS/NZS 3500 & NCC
Authorised across commercial and industrial water supply, sanitary, drainage, fire water services, and testable backflow prevention (AS/NZS 3500, AS 2419.1, AS 2441, and the National Construction Code), alongside licensed electrical capabilities for burner controls and plant integration.
Technical Capabilities.
Engineered Valve Trains
Assembly, modification, and pressure testing of double-block-and-bleed safety shut-off valve trains, proof-of-closure switches, gas pressure switches (high/low), air-fuel ratio controls, and leak detection systems.
Burner Management Systems (BMS)
Integration and functional testing of flame safeguards, UV/IR flame scanners, ionization probes, purge timers, safety interlocks, and emergency stop circuits.
Appliance Conversion, Retrofits & Upgrades
Upgrading legacy industrial burners and non-compliant imported equipment to meet current AS 3814, AS 1375, AS/NZS 5601.1, and AS/NZS 1596 safety requirements, including fuel conversions across Natural Gas, LPG, and Biomethane.
Ventilation, Flueing & Interlock Verification
Ensuring forced-draft, induced-draft, and natural-draft flueing systems are mechanically interlocked with the appliance safety circuit to prevent unsafe firing conditions.
Inert Purging & Combustion Commissioning
Safe pre-commissioning line purging, air-fuel ratio tuning, flue gas emissions analysis (CO, O₂, CO₂, NOₓ), and coordination with accredited Type B appliance inspectors for final sign-off.
Specialist Appliance Applications.
We have specialized expertise across custom and high-demand thermal equipment, including:
Incinerators & Thermal Oxidizers
Medical, quarantine, agricultural, and industrial waste incinerators, afterburners, and volatile organic compound (VOC) abatement units.
Cremators
High-temperature human and animal cremators, secondary combustion chambers, and automated temperature/draught control trains.
Smoke Ovens & Commercial Food Processing
Industrial smokehouses, curing ovens, bakery tunnel ovens, steam boilers, and thermal fluid heaters.
Commercial Coffee Roasters
Custom and imported drum and fluid-bed coffee roasters, catalytic afterburners, chaff collectors, and gas train compliance upgrades.
Stationary Gas Engines & Turbines
Fuel gas supply trains, pressure regulation, knock-out pots, filtration, and safety shut-off systems for stationary reciprocating gas engines, generators, and compressors.
Mining & Metallurgical Kilns/Furnaces
Assay furnaces, gold elution heaters, drying kilns, and smelting pre-heaters across regional WA mine sites.
Need a Rapid Quote, Pre-Qualification Pack, or Technical Consultation?
Speak directly with our Western Australian commercial and industrial gas engineering team for upcoming shutdowns, brownfield upgrades, compliance audits, or greenfield capital works.
Direct Procurement & Vendor Details
- Phone1300 779 171
- Australian Business NumberABN 78 714 615 245
- HeadquartersCommercial Operations Center, Perth, Western Australia
Explore Other Specialist Gas Capabilities.
Commercial & Industrial Gasfitting & Plumbing
All-pressure commercial and industrial gasfitting (<200 kPa and >200 kPa), Type A and Type B appliance piping, gas leak detection and leak repairs, water removal from gas installations, below-ground PE piping, commercial fire water services, backflow testing, and water supply, sanitary, and drainage plumbing.
Medical & Laboratory Gas Pipeline Systems
AS 2896 compliant medical and lab pipelines for Medical O₂, Medical Air, N₂O, CO₂, N₂, Medical Vacuum, Surgical Air, and WAGD.
Process, Shielding, Instrument & Biomethane Gases
Shielding and fuel gases (Argon, CO₂, O₂, Acetylene, LPG to AS/NZS 1596), high-purity instrument gas lines, and biomethane / renewable gas infrastructure for processing and power generation.
Pressure Testing, Audits, Leak Repairs & Maintenance
Statutory inspections, compliance audits, pneumatic/hydrostatic pressure testing (<200 kPa & >200 kPa), gas leak detection and leak repairs, removing water from gas installations, commercial fire water services, and annual backflow prevention testing (DCVs & RPZDs).
HSEQ, Licences, Insurances & WA Mobilisation
WHS Act & High Risk Construction Work (HRCW) compliance, WHS (Mines) Regulations & Mine Safety Management System (MSMS) integration, High Risk Work Licences, excavation & asset locating, and WA mobilisation.